Pipework Testing (drainage) Quantity Calculator
Linear measurement of drainage pipework testing by CCTV, air pressure, water pressure, or mandrel pull. Computes tested length (m) per CESMM4 I.8 and NRM2 33.18; deemed included under MMHW 500.7 and SMM7 R12.7.
Slug · pipework_testing · v1.0
Paid tier
Subscribe or buy a pass to compute this assembly
Paid assemblies surface their parameter forms, BoQ output, project save/reload, and full per-standard Excel + DXF + PDF deliverables once a CivilQuants subscription or 7-day pass is active. Per-standard bills across CESMM4, NRM2, SMM7, and MMHW; project-level recompute; watermark-free outputs.
Pipework Testing (drainage) — a worked example, measured four ways
The same assembly at default dimensions, rendered as a Bill of Quantities under each measurement standard. Switch the standard to see how the bill changes. Change the inputs in the calculator to compute your own.
CESMM4 · 1 item · units m
| Code | Description | Unit | Quantity |
|---|---|---|---|
| I.8.1.2 | Testing of new pipework — CCTV survey, 225mm nominal bore; including all instruments, recording, video survey output where applicable, certification and submission of test results | m | 100 |
Procurement take-off: the total quantity to order of each material, from the same compute. Supplier-neutral, so you buy anywhere.
- Pipework Testing100 m
Illustrative example at default dimensions · engine ref 5daff9 · not a tendered quantity