Road Marking Quantity Calculator
Road markings applied per TSRGD 2016 and SHW Cl. 1207-1215 in thermoplastic, cold paint, or preformed materials. Computes longitudinal lines (m), hatched areas (m²), symbols and legends (Nr), and road studs (Nr) per MMHW Series 1200, CESMM4 Class X, and SMM7 Q40.
Slug · road_marking · v1.0
Paid tier
Subscribe or buy a pass to compute this assembly
Paid assemblies surface their parameter forms, BoQ output, project save/reload, and full per-standard Excel + DXF + PDF deliverables once a CivilQuants subscription or 7-day pass is active. Per-standard bills across CESMM4, NRM2, SMM7, and MMHW; project-level recompute; watermark-free outputs.
Road Marking — a worked example, measured four ways
The same assembly at default dimensions, rendered as a Bill of Quantities under each measurement standard. Switch the standard to see how the bill changes. Change the inputs in the calculator to compute your own.
CESMM4 · 1 item · units m
| Code | Description | Unit | Quantity |
|---|---|---|---|
| X.5 | Road marking line — continuous longitudinal line per TSRGD 2016 Schedule 6; width class standard_100mm (actual 100mm); material: thermoplastic; longitudinal road marking line, continuous pattern, 100mm wide, thermoplastic per SHW Cl. 1208 | m | 200 |
Procurement take-off: the total quantity to order of each material, from the same compute. Supplier-neutral, so you buy anywhere.
- Road Marking Line200 m
Illustrative example at default dimensions · engine ref 865592 · not a tendered quantity