Calculator · Paid tier← All calculators

Single Service Run Quantity Calculator

Single utility service trench for water, gas, electricity, telecoms, or street lighting per NJUG Volume 1 minimum-cover requirements. Computes excavation, granular bedding, surround, pipe or duct (m), warning tape, selected fill, and optional earthwork support.

Slug · single_service_run · v1.0

Paid tier

Subscribe or buy a pass to compute this assembly

Paid assemblies surface their parameter forms, BoQ output, project save/reload, and full per-standard Excel + DXF + PDF deliverables once a CivilQuants subscription or 7-day pass is active. Per-standard bills across CESMM4, NRM2, SMM7, and MMHW; project-level recompute; watermark-free outputs.

Single Service Run — a worked example, measured four ways

The same assembly at default dimensions, rendered as a Bill of Quantities under each measurement standard. Switch the standard to see how the bill changes. Change the inputs in the calculator to compute your own.

CESMM4 · 7 items · units m³, m

CodeDescriptionUnitQuantity
E.4.4.4Excavation for pipe trenches, maximum depth 1-2m22.84
E.5.3Disposal of excavated material off-site22.84
E.6.3.2Filling, imported selected material, Class 6N (selected granular) per SHW 601 Table 6/1 row 6N15.49
L.5.1Granular bedding to pipe, Class S per HA 40/01; Class 6N granular fill2.12
L.5.2Granular surround to pipe, Class S per HA 40/01; Class 6N granular fill5.23
I.5.1.1Water main, MDPE pipe to BS 12201-2 (SDR 11), nominal bore 125mm; laid in trenchm50
Y.6.1.1NJUG 7 service marker tape, Blue (water); laid above service, marked 'CAUTION WATER BELOW'm50
● MATERIAL SCHEDULE

Procurement take-off: the total quantity to order of each material, from the same compute. Supplier-neutral, so you buy anywhere.

  • Disposal22.84
  • Excavation Trench22.84
  • Fill Selected15.49
  • Pipe Bedding2.12
  • Pipe Service50 m
  • Pipe Surround5.23
  • Warning Tape50 m

Illustrative example at default dimensions · engine ref 3f7056 · not a tendered quantity